Import guide/Litematica layer guide

How to Build Layer by Layer in Litematica (Single Layer Mode)

Show one horizontal slice of a schematic in Minecraft, build that layer, then move upward. MinePilot’s website layer list helps you plan; Litematica’s Render Layers controls filter the in-game hologram.

Quick answer: show one layer at a time

With your schematic loaded and its placement aligned:

  1. Open Configuration menu → Render Layers from Litematica's main menu.
  2. Set Axis: Y and change Layers to Single Layer.
  3. Set Layer to the floor's world Y-coordinate, build that slice, then increase it by one to continue upward.

The layer number is a world height, not necessarily the schematic's local layer. The placement and offset examples below show how to match them.

Verified with Minecraft Java 26.3, Fabric Loader 0.20.0, Litematica 0.29.1 and MaLiLib 0.30.2. The screenshots use a small house example. Other versions may have different menus; install mod versions that explicitly support your Minecraft version.

1. Choose the right file

On the build page, select Litematica (.litematic) in the download menu when available. A file ending in .schem is a different format; renaming its extension does not convert it.

If only .schem is available, follow the import guide for WorldEdit. Direct loading of non-native schematics depends on your Litematica version and file support. If it cannot read your file, import it into a compatible temporary creative world with WorldEdit, then make and save a Litematica area selection as a native schematic. Check the result before using it in survival; conversion is not a guarantee of working Redstone or preserved inventories.

Native downloads to try

Open a build and choose Litematica (.litematic) in its download menu.

Brick-Screen Privacy Residence — Minecraft build preview
Starter Houses

Brick-Screen Privacy Residence

Two-storey modern brick house behind a perforated brick screen and a shaded glass gallery, with a screened entry vestibule, two bedrooms and a roof-light slot, ideal for privacy-minded city worlds.

30×17×25 blocksNative .litematic
Japanese Castle Tenshu Keep — Minecraft build preview
Large Builds

Japanese Castle Tenshu Keep

A white-concrete tenshu rises from a stepped stone base through three shrinking chambers, with broad upturned dark-prismarine roofs, built for castle compounds.

36×30×36 blocksNative .litematic
Two-Mast Coastal Square-Rig Brig — Minecraft build preview
Landmarks

Two-Mast Coastal Square-Rig Brig

A coastal brig with a curved timber hull, two square-rigged masts, a raised quarterdeck and accessible cabin and cargo deck for harbor scenes and nautical exploration.

27×49×61 blocksNative .litematic
Roman Colosseum Reconstruction — Minecraft build preview
Large Builds

Roman Colosseum Reconstruction

An oval Roman-inspired amphitheatre with an open arena, stepped seating and three exterior arcade levels, for a Roman-themed town or creative map.

193×51×161 blocksNative .litematic

Browse all native Litematica downloads →

2. Load the native schematic

  1. Put the .litematic file in the schematics folder of the Minecraft instance you actually launch. A launcher profile can have its own game directory.
  2. Join a world and open Litematica's main menu with your configured menu hotkey.
  3. Choose Load Schematics, select the file, enable Create a placement, then choose Load Schematic.
  4. If you loaded it without creating a placement, open Loaded Schematics and use Create placement. A loaded file needs an enabled placement to appear in the world.

The hologram is a building reference. Loading it does not place real blocks in your world.

3. Position and orient the placement first

Open Schematic Placements from the main menu, then Configure for your placement. Set its origin's X, Y and Z coordinates, or use Move to player as a starting point. Use Rotation to turn it, and leave Mirror unchanged unless you intend to reflect the design. Confirm the entrance, footprint and ground level against your terrain before laying foundations. Rotation is around the placement origin, so check the footprint again after turning it.

Set the layer mode to All while checking the whole building. Once aligned, keep the placement fixed while you build; changing its Y also changes which world height contains each schematic layer.

Litematica placement configuration showing origin X 10, Y 99, Z 10, plus Rotation and Mirror controls
Placement configuration: confirm the origin, Rotation and Mirror before building. Click the image to view it full size.

4. Show a single horizontal layer

  1. In Litematica's main menu, open Configuration menu, then the Render Layers tab.
  2. Set Axis: Y for horizontal floors. X and Z make vertical slices.
  3. Click the Layers mode button until it reads Single Layer.
  4. Enter the desired world Y in Layer, or use the +/− control beside it: left-click to increase, right-click to decrease in the tested version. Set Here uses your player's current coordinate on the selected axis.
  5. Close the menu to build against that slice of the hologram.

This number is a world coordinate, not necessarily MinePilot's local layer number. For a zero-offset schematic placed at world Y=99, local layer Y=1 appears at world Y=100. Files with region offsets need that offset included too. Check where the lowest visible floor actually lands before matching the two guides.

Litematica Render Layers tab set to Single Layer, Axis Y, Layer 100, showing one horizontal slice of a house hologram
Single Layer at world Y=100. The +/− control adjusts the height; Set Here uses your current coordinate. Click the image to view it full size.

5. Show a range and advance while building

For several floors at once, change Layers to Layer Range and set Min layer and Max layer. Both endpoints are included: 99–101 shows three horizontal layers. Return to All to see the full structure.

To build upward one level at a time, use Single Layer, finish the current slice, then increase Layer by one. You can reopen Render Layers or bind layerNext and layerPrevious in the Hotkeys tab. Check your own bindings; this guide does not assume a particular keyboard layout or shortcut. In Layer Range mode, the Hotkey checkboxes select which boundary those hotkeys move. Use the numeric fields when you want an exact range.

Litematica Render Layers tab set to Layer Range on Axis Y with Min layer 99 and Max layer 101
Layer Range from Y=99 through Y=101, including both endpoints. The Hotkey checkboxes choose which boundary moves. Click the image to view it full size.

6. Use MinePilot alongside the in-game view

Keep the build page's material list, dimensions, preview and layer guide open to plan supplies and inspect the build. Its layer list describes the schematic's local Y-levels. Build pages may show only the early layers; follow the playground link for the full interactive layer view when provided. Selecting a layer in the website playground does not change Litematica, and moving the in-game placement does not update the website. Match the world height and orientation yourself. For a large project, check the dimensions in the MinePilot playground before choosing a site.

Quick troubleshooting

  • Nothing or only part of the hologram appears: switch to All, check that the placement and its regions are enabled, and check schematic rendering in the Visuals settings. Then restore Axis: Y and a height inside the building.
  • Distant parts of a large hologram are missing: first check layer filters and approach the missing area. In the tested version, loadEntireSchematics in Generic settings can load schematic chunks beyond the currently loaded world chunks. This can use more memory; it is separate from selecting a layer.
  • The layer changes when you move: check layerModeFollowsPlayer in Generic settings. Turn it off when you want a fixed building layer.
  • The building is buried, floating or facing the wrong way: check the placement's origin Y, X/Z, Rotation and Mirror in its configuration. Confirm terrain clearance with all layers visible.
  • The file is missing from the list: check the launched instance's game directory, the real file extension, and any custom schematic directory setting.
  • Loading fails or blocks look wrong: verify Minecraft, Fabric, Litematica and MaLiLib compatibility, plus the build's required game version. Use a supported profile; changing the extension or loading newer blocks in an older game will not fix compatibility.
Browse BuildsBack to import guide